The THORIZ is a match made in heaven for the best-selling SG4 rod range. Not only cosmetically they perfectly match, but also performance wise. Savage Gear put the focus on super smooth gear feel and performance over time while fishing in the most rough conditions. The smaller sizes are perfect for finesse fishing with Carolina rigs, jigs, crankbaits and twitchbaits for perch and zander, while the larger sizes can easily handle big baits, spinnerbait and big softbaits for monster pike. The K-Alloy body eliminates all play in the body so the Precision Cut Gearing works flawlessly, even under heavy pressure. The THORIZ reels are available in a wide range of sizes and gear ratios, so Savage Gear got you covered for any fresh or inshore fishing style out there!
- K-Alloy body and GRC rotor_7+1 Sealed Stainless Steel ball bearing system
- Precision Cut Gear, precisely cut machined gearing for a super smooth gear feel
- One-piece handle design
- Friction Control System Carbon Drag washers with Hydro Sealed HS-Drag
- Tapered Spool Lip Design for maximum casting distance and preventing wind knots
- Duragrease and Duraoil to ensure a perfectly smooth drag and gears
- Rubberized paddle knob on sizes 1000-2000, Rubberized T-handle on sizes 2500-4000 and rubberized power knob on C5000 model
| Code | Model | Drag Force | Rear Ratio | Spool Capacity | Weight |
|---|---|---|---|---|---|
| 1609519 | 1000 | 4,1kg | 5.2:1 | 200m/0.12mm | 214g |
| 1609520 | 2500 | 4,5kg | 5.2:1 | 230m/0.16mm | 260g |
| 1609521 | 2500HG | 4,5kg | 6.2:1 | 230m/0.16mm | 260g |
| 1609522 | 4000 | 6,8kg | 5.2:1 | 190m/0.25mm | 312g |
| 1609523 | C2000 | 4,1kg | 5.2:1 | 150m/0.16mm | 214g |
| 1609524 | C3000 | 5,4kg | 5.2:1 | 150m/0.23mm | 274g |
Brand:
Savage Gear
Drag:
- Front Drag
Bearings:
- 7+1BB
Reel Size:
- 30 | 3000
Shimano reel features
Okuma Reel features
ALUMILITE FRAME CONSTRUCTION
AlumiLite construction incorporates Okuma’s rigid aluminum
body technology on spinning, trolling and fly reel
designs. Aluminum frames are stronger and more rigid
and are capable of withstanding more pressure and
torque than traditional graphite frames.
:
AlumiLite construction incorporates Okuma’s rigid aluminum
body technology on spinning, trolling and fly reel
designs. Aluminum frames are stronger and more rigid
and are capable of withstanding more pressure and
torque than traditional graphite frames.
CRC: Corrosion Resistant Coating
Corrosion Resistant Coating combines Okuma’s
proprietary HDG-II gearing system, which offers
exceptional anti-corrosive properties compared to
standard gears, with a coating of Corrosion X HD to
all internal and external parts. The CRC process actually
penetrates and bonds to the metal, which helps
significantly toward long term protection.
:
Corrosion Resistant Coating combines Okuma’s
proprietary HDG-II gearing system, which offers
exceptional anti-corrosive properties compared to
standard gears, with a coating of Corrosion X HD to
all internal and external parts. The CRC process actually
penetrates and bonds to the metal, which helps
significantly toward long term protection.
DFD: DUAL FORCE DRAG SYSTEM
DFD incorporates both surfaces of the spool to maximize
high-end drag pressure, efficiency and overall smoothness.
Mounted in the top of the spool and protected by
the Hydro Block system is a multi-disc felt drag system
that works in conjunction with a secondary drag system
that is mounted under the spool. Even pressure is applied
to both surfaces of the spool for maximum stability.
:
DFD incorporates both surfaces of the spool to maximize
high-end drag pressure, efficiency and overall smoothness.
Mounted in the top of the spool and protected by
the Hydro Block system is a multi-disc felt drag system
that works in conjunction with a secondary drag system
that is mounted under the spool. Even pressure is applied
to both surfaces of the spool for maximum stability.
EFR II
The Even Flow Roller System utilizes a ball bearing
under the line roller to maximize efficiency. This roller
helps reduce line twists by freely rolling over the line
roller without friction. Without this system, line will
naturally twist when drag is pulled.
:
The Even Flow Roller System utilizes a ball bearing
under the line roller to maximize efficiency. This roller
helps reduce line twists by freely rolling over the line
roller without friction. Without this system, line will
naturally twist when drag is pulled.
HYDRO BLOCK
The Hydro Block design features a rubber gasket
mounted in the top of a spinning reel spool. This rubber
seal blocks water and foreign materials from entering
the drag system. The Hydro Block system ensures that
your drag washers always perform at optimal levels.
:
The Hydro Block design features a rubber gasket
mounted in the top of a spinning reel spool. This rubber
seal blocks water and foreign materials from entering
the drag system. The Hydro Block system ensures that
your drag washers always perform at optimal levels.
PEG: PRECISION ELLIPTICAL GEARING
The revolutionary design is patented in a number
of countries around the world and is the soul of the
Okuma mid to upper-end spinning reel range. The
Precision Elliptical Gearing design uses elliptical
shaped oscillation gears which provide exceptional
line lay, improved smoothness and maximum long-life
durability. The gears are always engaged and provide
a very smoothspool stroke, eliminating the spool from
jumping as commonly found on many reels.
:
The revolutionary design is patented in a number
of countries around the world and is the soul of the
Okuma mid to upper-end spinning reel range. The
Precision Elliptical Gearing design uses elliptical
shaped oscillation gears which provide exceptional
line lay, improved smoothness and maximum long-life
durability. The gears are always engaged and provide
a very smoothspool stroke, eliminating the spool from
jumping as commonly found on many reels.
QUICK-SET ANTI-REVERSE
This system allows for instant handle engagement
and eliminates all handle back play commonly found
in many reels. This is accomplished by using a corrosionresistant
stainless steel roller bearing that engages
the reel in one direction for rock-solid hook sets.
:
This system allows for instant handle engagement
and eliminates all handle back play commonly found
in many reels. This is accomplished by using a corrosionresistant
stainless steel roller bearing that engages
the reel in one direction for rock-solid hook sets.
RES II: Rotor Equalizing System
The RES II System stands for Rotor Equalizing
System. This second-generation RES System incorporates
a computer-balanced weight precisely
placed in the rotor. This weight allows for precision
balance and eliminates all spool wobble for perfect
alignments and smooth cranking.
:
The RES II System stands for Rotor Equalizing
System. This second-generation RES System incorporates
a computer-balanced weight precisely
placed in the rotor. This weight allows for precision
balance and eliminates all spool wobble for perfect
alignments and smooth cranking.
Order this product by phone
We ship internationally 
Full product warranty
14 days money back guarantee