Savage Gear SG6
SG6 To make a reel with peerless strength and power you have to make some compromises, right? Wrong. The SG6 is made with a Carbon Reinforced Composite (CRC) body and rotor, which is designed to increased stiffness and strength but with a much lower weight that standard graphite material. It can handle whatever extreme forces you throw at it, and it won’t weigh you down. But it’s not all about strength, the SG6 is packed with other smart details such as a Braid-Ready spool that eliminates the need for mono backing, our proprietary Dura Grease for smooth and long-lasting operation, an aluminium spool, screw-in diecast handle and T-shaped line clip for easier operation. This reel is going to get big fan club.
- Carbon Reinforced Composite (CRC) body and rotor
- Dura Grease
- 8+1 stainless steel ball bearings (including two Japanese BB)
- Screw-in aluminium diecast handle
- T-shaped line clip
- Cone-shaped bail holder
- Soft-touch handle
- Non-slip spool design
- Spare aluminium spool
- Sealed carbon drag system
| Code | Model | Drag Force | Rear Ratio | Spool Capacity | Weight |
|---|---|---|---|---|---|
| 74732 | 1000 | 9.5kg | 5.2:1 | 150m/0.14mm | 195g |
| 74733 | 2500 | 12.5kg | 5.2:1 | 150m/0.20mm | 222g |
| 74734 | 3000 | 12.5kg | 5.2:1 | 150m/0.23mm | 229g |
| 74735 | 4000 | 15.0kg | 5.2:1 | 150m/0.28mm | 255g |
| 74736 | 2500H | 12.5kg | 6.2:1 | 150m/0.20mm | 222g |
| 74737 | 3000H | 12.5kg | 6.2:1 | 150m/0.23mm | 229g |
| 74738 | 4000H | 15.0kg | 6.2:1 | 150m/0.28mm | 255g |
Brand:
Savage Gear
Drag:
- Front Drag
Bearings:
- 7+1BB
Reel Size:
- 30 | 3000
Shimano reel features
Okuma Reel features
ALUMILITE FRAME CONSTRUCTION
AlumiLite construction incorporates Okuma’s rigid aluminum
body technology on spinning, trolling and fly reel
designs. Aluminum frames are stronger and more rigid
and are capable of withstanding more pressure and
torque than traditional graphite frames.
:
AlumiLite construction incorporates Okuma’s rigid aluminum
body technology on spinning, trolling and fly reel
designs. Aluminum frames are stronger and more rigid
and are capable of withstanding more pressure and
torque than traditional graphite frames.
CRC: Corrosion Resistant Coating
Corrosion Resistant Coating combines Okuma’s
proprietary HDG-II gearing system, which offers
exceptional anti-corrosive properties compared to
standard gears, with a coating of Corrosion X HD to
all internal and external parts. The CRC process actually
penetrates and bonds to the metal, which helps
significantly toward long term protection.
:
Corrosion Resistant Coating combines Okuma’s
proprietary HDG-II gearing system, which offers
exceptional anti-corrosive properties compared to
standard gears, with a coating of Corrosion X HD to
all internal and external parts. The CRC process actually
penetrates and bonds to the metal, which helps
significantly toward long term protection.
DFD: DUAL FORCE DRAG SYSTEM
DFD incorporates both surfaces of the spool to maximize
high-end drag pressure, efficiency and overall smoothness.
Mounted in the top of the spool and protected by
the Hydro Block system is a multi-disc felt drag system
that works in conjunction with a secondary drag system
that is mounted under the spool. Even pressure is applied
to both surfaces of the spool for maximum stability.
:
DFD incorporates both surfaces of the spool to maximize
high-end drag pressure, efficiency and overall smoothness.
Mounted in the top of the spool and protected by
the Hydro Block system is a multi-disc felt drag system
that works in conjunction with a secondary drag system
that is mounted under the spool. Even pressure is applied
to both surfaces of the spool for maximum stability.
EFR II
The Even Flow Roller System utilizes a ball bearing
under the line roller to maximize efficiency. This roller
helps reduce line twists by freely rolling over the line
roller without friction. Without this system, line will
naturally twist when drag is pulled.
:
The Even Flow Roller System utilizes a ball bearing
under the line roller to maximize efficiency. This roller
helps reduce line twists by freely rolling over the line
roller without friction. Without this system, line will
naturally twist when drag is pulled.
HYDRO BLOCK
The Hydro Block design features a rubber gasket
mounted in the top of a spinning reel spool. This rubber
seal blocks water and foreign materials from entering
the drag system. The Hydro Block system ensures that
your drag washers always perform at optimal levels.
:
The Hydro Block design features a rubber gasket
mounted in the top of a spinning reel spool. This rubber
seal blocks water and foreign materials from entering
the drag system. The Hydro Block system ensures that
your drag washers always perform at optimal levels.
PEG: PRECISION ELLIPTICAL GEARING
The revolutionary design is patented in a number
of countries around the world and is the soul of the
Okuma mid to upper-end spinning reel range. The
Precision Elliptical Gearing design uses elliptical
shaped oscillation gears which provide exceptional
line lay, improved smoothness and maximum long-life
durability. The gears are always engaged and provide
a very smoothspool stroke, eliminating the spool from
jumping as commonly found on many reels.
:
The revolutionary design is patented in a number
of countries around the world and is the soul of the
Okuma mid to upper-end spinning reel range. The
Precision Elliptical Gearing design uses elliptical
shaped oscillation gears which provide exceptional
line lay, improved smoothness and maximum long-life
durability. The gears are always engaged and provide
a very smoothspool stroke, eliminating the spool from
jumping as commonly found on many reels.
QUICK-SET ANTI-REVERSE
This system allows for instant handle engagement
and eliminates all handle back play commonly found
in many reels. This is accomplished by using a corrosionresistant
stainless steel roller bearing that engages
the reel in one direction for rock-solid hook sets.
:
This system allows for instant handle engagement
and eliminates all handle back play commonly found
in many reels. This is accomplished by using a corrosionresistant
stainless steel roller bearing that engages
the reel in one direction for rock-solid hook sets.
RES II: Rotor Equalizing System
The RES II System stands for Rotor Equalizing
System. This second-generation RES System incorporates
a computer-balanced weight precisely
placed in the rotor. This weight allows for precision
balance and eliminates all spool wobble for perfect
alignments and smooth cranking.
:
The RES II System stands for Rotor Equalizing
System. This second-generation RES System incorporates
a computer-balanced weight precisely
placed in the rotor. This weight allows for precision
balance and eliminates all spool wobble for perfect
alignments and smooth cranking.
Order this product by phone
We ship internationally 
Full product warranty
14 days money back guarantee